This homemade pumpkin purée starts with a whole pumpkin in a low oven. Bake it at 200°F until soft on several sides, then open it, remove the seeds and skin, and process the flesh until smooth. The hard cutting happens after the pumpkin has softened.
A small pie pumpkin may take about one to two hours. A ten-pound pumpkin takes about three hours, while larger pumpkins can need closer to four. Choose your pumpkin, leave room in the oven, and let its softness tell you when it is ready for the next step.
I make lunch and dinner before leaving for second-shift work unless something is already prepared. Homeschooling happens earlier in that same day, so a ready ingredient can be useful even when it is not a complete meal. Pumpkin purée is something you can portion for a specific recipe instead of starting with a whole pumpkin every time.
For the pumpkin apple butter pudding, for example, the pumpkin measure is a quarter cup. Once a plain batch is ready, small portions make that kind of recipe much easier to put together.
Choose A Pumpkin Or Winter Squash
Start with one edible pumpkin or winter squash. A small pie pumpkin is a manageable choice for one batch. Hubbard squash, Cinderella-type pumpkin, Long Island Cheese pumpkin and butternut squash are other choices used in the original whole-baking method.
The type of squash changes the color, flavor and moisture of the purée. Some flesh is deep orange; some is lighter. Keep the purée plain so the recipe you use it in can supply its own seasonings.
Rinse the outside and dry it before it goes on the oven rack. The skin stays on during baking and is removed afterward. There is no measured oil, salt, sugar or water added to this plain batch.
Set out a rimmed baking sheet to catch drips beneath the pumpkin and another suitable tray or heat-safe dish for opening it after cooking. A spoon, knife, oven mitts and clean storage containers should be ready too.
Bake The Pumpkin Whole At 200°F
Heat the oven to 200°F. Put the whole pumpkin directly on an oven rack with a rimmed baking sheet beneath it to catch any drips. Leave enough space around the pumpkin for heat to circulate.
For a small pie pumpkin, begin checking around one hour and allow about one to two hours. The one-hour field in the card is that first small-pumpkin check, not a promised full cooking time.
For a ten-pound pumpkin, allow about three hours. Larger pumpkins can take closer to four. An eleven-pound Hubbard squash may take about four hours too. Size and variety both affect the time, so use these examples for planning and check the pumpkin itself.
If you roast more than one, check each separately. One may soften before another. Rotate them partway through if needed for more even cooking, keeping the catch tray beneath any drips.
Check For Softness On Several Sides
Use proper oven mitts to protect your hands, then gently check whether the pumpkin gives under light pressure. Test more than one side. A soft spot on one surface does not tell you that the entire pumpkin has softened.
The skin may look less firm than it did at the start. What matters is that the pumpkin is soft enough to give a little when pressed. Keep baking if some sides are still hard.
Move the cooked pumpkin carefully onto a rimmed tray or a large heat-safe dish. It can release quite a lot of liquid when opened, so give that liquid a place to collect rather than cutting it straight on the countertop.
Open, Cool And Remove The Seeds
With the pumpkin supported on the tray, carefully make a cut down one side toward the bottom. Keep clear of the escaping steam and hot liquid. Let the pumpkin release heat before trying to finish halving it.
Once it is cool enough to handle safely, cut it the rest of the way in half. The softened skin and flesh should be easier to cut than the hard raw pumpkin was.
Scoop out the seeds and stringy center. Keep that material separate from the flesh you want to purée. Turn the halves as needed so you can see and remove the remaining strings.
Spoon the soft flesh away from the skin. Check the underside of each spoonful as you lift it out; the stored purée should not contain pieces of peel. Discard the skin and the seed-and-string material from this preparation.
Cool The Flesh Before Processing
My Ninja BN801 has the Precision Processor bowl and chopping blade for this job. Its instructions do not allow hot processing, so the flesh needs further cooling before it goes into that bowl.
Spread the scooped flesh in shallow heat-safe containers and cool promptly to room temperature. A cold-water bath around the containers can help. Keep the cooling and processing break within two hours; refrigerate promptly if you are not continuing.
Do not leave a large hot heap in a deep bowl while waiting for its middle to cool. Smaller, shallow portions release heat more readily and are easier to feed into the processor in batches.
Process Until Smooth
Fit the BN801 processor bowl and chopping blade according to its guide. Add cooled flesh within the bowl’s fill marks and secure the lid. Process in batches until smooth, stopping the machine before opening to scrape or check the texture.
The finished purée should have an even texture, without long strings, seed pieces or skin. It does not have to look identical for every variety of pumpkin. A wetter squash can give a softer purée than a drier one.
There is no extra blending-water measure in this method. Keep the flesh plain. If a later recipe asks for drained pumpkin, drain the amount for that recipe instead of quietly adding or removing liquid from every batch.
For the pudding linked above, the pumpkin should be cooked, cooled and drained if watery. That is its ingredient requirement. For the Full GAPS pumpkin pie shake, measure the half cup of cooked puréed pumpkin called for in that card.
Where The Purée Fits On GAPS
This is a plain roasted ingredient for Full GAPS recipes after pumpkin is introduced. The batch itself has no eggs, dairy, nuts or added sweetener. The pudding, shake, bread or soup you make with it will have its own ingredients and GAPS placement.
If you are cooking for the Introduction Diet, match the finished dish and its preparation to your exact stage in the Intro stages guide. The two finished recipes linked here are Full GAPS preparations.
When serving cooked pumpkin as a bowl or side on its own, add an appropriate fat as Dr. Natasha recommends for cooked plant foods. Cold-pressed coconut oil keeps that serving dairy-free, or use introduced homemade ghee. Keep the stored purée plain when another recipe supplies its own measured fat.
Portion And Store The Plain Purée
Transfer the finished purée into clean, small covered containers and refrigerate promptly at 40°F or below. Use refrigerated portions within three to four days. Freeze what you want to keep longer, with room in the container for expansion.
A quarter-cup portion is useful for one bowl of pumpkin pudding. A half cup matches the pumpkin measure in the shake. Those are portioning ideas for the finished ingredient, not a promised yield from one pumpkin.
Label the containers with the date and amount. Plan frozen portions for use within three months and thaw them in the refrigerator. Having an amount on the label means you can choose a container for the recipe you are making.
My upcoming Large-Family Batch Plan is for organizing prep-day cooking and portions through the week. Find it through the WFLI shop as it becomes available. A plain prepared ingredient like this is useful to plan alongside the finished meals it will become part of.
Frequently Asked Questions
How Much Purée Does One Pumpkin Make?
The recipe makes one batch, with no fixed cup or jar yield. Pumpkin size, seeds, skin and moisture all affect the flesh left for purée. Measure the finished amount needed for another recipe.
Can I Bake Two Pumpkins At Once?
Yes, if there is enough oven space and a suitable tray beneath to catch drips. Check both on several sides and rotate as needed. Doubling the pumpkin count does not mean doubling the roasting time.
What If The Purée Looks Watery?
Some squash has more moisture than others. Let the hot liquid released when opening the pumpkin collect in the tray, rather than pouring it back into the processor. If the recipe you are making needs drained pumpkin, drain that portion before measuring it. The pudding uses this thicker preparation; its quarter-cup measure is taken afterward.
Should I Season The Batch Before Storing?
Keep this batch plain. The pudding adds apple butter and cinnamon, while the shake has its own spice mixture. A plain purée lets each finished recipe have the flavor and fat amounts written in its card, without extra seasonings carried over from the storage jar.
Do I Need To Peel It Before Baking?
No. The whole-baking method leaves the skin on in the oven. After opening, cooling and removing the seeds, scoop out the flesh without including the skin.
Recommended Equipment
Use an oven rack, a rimmed stainless-steel baking sheet, a large heat-safe tray or dish, oven mitts, knife and spoon. For processing, use the Ninja BN801 with its eight-cup Precision Processor bowl and chopping blade. Have shallow cooling containers, measuring cups for portioning and covered refrigerator/freezer containers ready.
Whole Roasted Pumpkin Purée for Full GAPS
Ingredients
Equipment
Method
- Heat the oven to 200°F. Put the whole pumpkin on an oven rack with a rimmed baking sheet underneath to catch drips. Leave space for heat to circulate.
- Begin checking a small pie pumpkin around 1 hour and allow about 1–2 hours. A 10-pound pumpkin takes about 3 hours; larger pumpkins and an 11-pound Hubbard take closer to 4 hours. Wearing oven mitts, check that the pumpkin gives gently on several sides. Continue if any sides are hard. Check and rotate multiple pumpkins as needed.
- Carefully move the cooked pumpkin to a large rimmed tray or heat-safe dish. Make a cut down one side to the bottom, keeping clear of hot steam and liquid. Let heat escape until safe to handle, then finish halving it.
- Scoop out and discard seeds and stringy material. Spoon out the soft flesh without including the skin.
- Cool the flesh promptly in shallow heat-safe containers to room temperature before using the Ninja BN801. Keep the cooling/processing break within two hours, refrigerating if not continuing. Do not process hot flesh.
- Use the BN801 Precision Processor bowl and chopping blade. Process cooled flesh in batches within its fill marks, until smooth. Stop before opening to scrape or check. No extra water is specified.
- Transfer to clean small covered containers and refrigerate promptly, or freeze portions with expansion space. Keep the batch plain for other recipes. When serving as a bowl or side on its own, add an introduced fat to the serving.


Leave a comment